Call Today 716.688.4675

Beamforming Algorithms for Ultrasonic Imaging

VOCAL’s beamforming algorithms for ultrasonic imaging provide enhanced image quality by reducing the effects of poor resolution and speckle.  An array of transducers are typically used with delay-and-sum (DAS) and minimum variance (MV) beamforming  techniques for improved image quality. Contact us to discuss your application requirements.

The two primary characteristics of ultrasound imaging are resolution and speckle. Resolution can be defined as the minimum distance between two point scatters for each to be imaged as individual sources. Poor resolution results in being unable to decipher which waves are coming from which point scatters.

Speckle gives ultrasonic images their grainy look. This artifact results when a large number of densely distributed point scatters that are too small be resolved by the acoustic imaging system reflect a transmitted signal. The combination of all the reflections results in a signal with a Rayleigh distributed magnitude. This causes the spatial correlation of the resulting image to differ from the actual. Speckle regions can either be considered noise or useful information. This depends on the ultrasonic imaging application. For example, in medical imaging, speckle may be an important characteristic  because they give an indication of homogenous tissues.

In ultrasonic imaging a large array of transducers are used for acoustic imaging. With the added spatial dimension, beamforming can be applied to the acoustic imaging process to improve image quality. Usually, DAS or MV beamforming is used to scan the image so only reflections directly from the point scatters are imaged while the multi-path reflections and reflections from other point scatters not within the beampattern are filtered out. With DAS, the vectors (the weights applied to received data) are predetermined to produce a narrow mainlobe while minimizing the sidelobes. For MVthe beamforming vectors are based on the statistics of the received data. The object of MV is to minimize the variance of the output of the beamformer, while maintaining unit gain in the desired direction. By using the statistics (a covariance matrix) of the recorded signal, the MV beamformer can adjust its beampattern to steer nulls in the direction of interferes (reflections from scatters not from the desired direction), so the adaptive beamformer output has little deviation.

The MV beamformer can achieve better resolution than DAS because of its adaptive nature. But it is to be noted that because the weights of the beamforming vectors are calculated from the statistics of the received data, a MV beamformer will affect speckle characteristics differently than a DAS. Generally, MV reduces the magnitude of speckle. If speckle information is important in the medical application, then the MV beamformer has to be adjusted. By using spatial and temporal averging of the covariance matrix, one can control the resolution and the magnitude of speckle. Increasing the length of the subarray, results in spatial averaging which improves the resolution of the image because it improves the estimate of the covariance matrix. This also results in a reduction of speckle magnitude. For a given subbarray length, increasing the length of the temporal average for the MV beamformer increases the intensity of the speckle with the  resolution being maintained.

For more information:

VOCAL Technologies, Ltd.
520 Lee Entrance, Suite 202
Amherst New York 14228
Phone: +1-716-688-4675
Fax: +1-716-639-0713
Email: sales@vocal.com