Call Today 716.688.4675

Single directionless filter for circular array sum and filter beamformer

We describe an approach to beamforming an acoustic source with a circular array microphone topology by deploying a single inverse filter which is source direction blind. Consider the circular array illustrated in Figure 1 below and suppose a beamforming solution is desired.

     Figure 1: Circular microphone array topology for 8 microphones, \psi= \frac{2\pi}{7}.

Define the angle of arrival of the signal from a source at s to be  \theta, the impinging angle at microphone m_{8} using the line joining microphones m_k and m_8 as reference such that the following holds:


\theta = \underset{\left| \angle {\left(m_k,m_8, s\right)} \right|}{\arg\max} \angle{\left(m_k,m_8, s\right)}


It is easy to visualize then that for all signals arriving from a 360^{\circ},


-\frac{\psi}{2} \le \theta - \frac{\pi}{2} \le \frac{\psi}{2}


Thus, for all direction of arrivals, \exists \theta,  -\frac{\psi}{2} \le \theta - \frac{\pi}{2} \le \frac{\psi}{2} such that :


Y(w) = X_{\theta} (w) H_{\theta}(w) + \frac{1}{8}\sum\limits_{n}^8 N_n(w)

H_{\theta}(w), the effective “sum filter”, can be synthesized as:

H_{\theta} (w) = \frac{1}{8} + \frac{1}{8} e^{-j w \frac{d}{d} \sin{\theta}} + \frac{2}{8} \sum\limits_{n=1}^3 e^{j w \frac{d}{c} \cos{(n\psi)} \sin{\theta}} \cos{\left( w \frac{d \sin{(n \psi)}}{c} \sin{\theta} \right)}, -\frac{\psi}{2} \le \theta - \frac{\pi}{2} \le \frac{\psi}{2}


H_{\theta}(w), the filter arising from summing the signals at all microphones, attenuates some speech signals considerably as seen in Figure 2 below, and has to be compensated for.


       Figure 2: Filter produced by summing all the microphone outputs.

To remove the effects of the filter H_{\theta}(w), we need knowledge of \theta. This requires computing the direction of arrival with its accompanying error margins and picking the appropriate inverse filter to apply.  In real time operating systems, this requirement may overwhelm the processor. An alternative exists such that there is no requirement to actually know the direction of arrival of the signals and only a single inverse filter is required. This alternative hinges on the previous stated observation that:

\theta = \underset{\left| \angle {\left(m_k,m_8, s\right)} \right|}{\arg\max} \angle{\left(m_k,m_8, s\right)}

Suppose we assume the direction of arrival is \theta = \frac{\pi}{2}, how much error will the magnitude response pick up due to the error margin within \pm \frac{\psi}{2} in \theta ? It turns out the errors in the scaling is very minimal; no more than 2dB. Thus we can apply an inverse filter of


\hat{H}_{\theta}^{-1} (w) = \frac{1}{H_{\theta}(w)}

The effective magnitude response of the above approach, \forall ~ \theta,  is as shown in Figure 3 below:

Figure 3: Effective filter magnitude response

The super directivity of the filter can be used to improve the noise attenuation.

VOCAL Technologies offers custom designed solutions for beamforming with a direction of arrival estimation, robust voice activity detector, acoustic echo cancellation and noise suppression. Our custom implementations of such systems are meant to deliver optimum performance for your specific beamforming task. Contact us today to discuss your solution!

More Information

VOCAL Technologies, Ltd.
520 Lee Entrance, Suite 202
Amherst New York 14228
Phone: +1-716-688-4675
Fax: +1-716-639-0713