ATA Features
Included are all the standard features expected of an ATA, plus innovative customer demanded
premium features. With the patent-pending VOCAL VoATA control software, an end user can
manage up to four VoIP service providers with a single ATA. User access may be automatic on a
per-number basis, or can be as simple as using a standard long distance prefix such as
"1010825…".
- Phone User Services
- Place/Cancel Outgoing Calls
- Answer Incoming Calls
- Full Duplex Audio
- Flexible Dial Plan Support
- Fax Tone Detection (Pass Through)
- ITU T.38 Fax Support
- PSTN Line Support (Dial and Backup)
- PSTN Emergency 911/999
- Call-in Profiles
- IPBX (Internet Private Branch Exchange)
- IHT (Internet Home Termination)
- SIHT (Simple Internet Home Termination)
- SIOT (Small Internet Office Termination)
- Voice Features
- Voice Activity Detection (VAD)
- Silence Suppression (DTX)
- Comfort Noise Generation (CNG)
- Packet Loss Concealment (PLC)
- Dynamic Jitter Buffer (Adaptive)
- Audio Codec Preferences
- Dynamic Payload Negotiation
- Codec Name Assignment
- Adjustable Audio Frames per Packet
|
|
- Telephony
- CLASS Features
- Call Waiting Enable/Disable
- Caller ID Display Enable/Disable
- Call Waiting Caller ID Enable/Disable
- Blocked Call List for a Specified Number
- Distinctive Ring for a Specified Number
- Block/Unblock Caller ID
- Block/Unblock Caller ID for One Call
- Accept Priority Call of a Specified Number
- Busy Number Redial
- Call Return (Call the Last Caller)
- Deactivate/Activate Call Waiting for Current Call
- Call Forwarding
- Forward Priority Call of a Specified Number
- Forward on Busy
- Forward on No Answer
- Forward all Calls
- Speed Dial (8 + 20 Numbers)
- Block Anonymous Calls
- Do Not Disturb
- Call Transfer
- 3-way Conference Calling with Local Mixing
- Redial
- Call Hold
- Call Waiting/Flash
- Flash Hook Timer
- Delay Disconnect
- Hot Line and Warm Line Calling
- Call Blocking with Toll Restriction
- Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI
- Call Waiting Caller ID with Name/Number
- Distinctive Ringing
- Distinctive Call Waiting
- MWI - Message Waiting Indicator Tone and Visual
- VMWI Via FSK
- Polarity Control
|
|
- Call Progress Tones
- Programmable Tone Generation Patterns
- Four Tones, Four On/Off Time Pairs
- Initial Dial Tone
- Secondary Dial Tone
- Stuttered Dial Tone
- Message Wait Dial Tone
- Call Forward Dial Tone
- Pre-Ringback Dial Tone
- Ring Back Tone
- Call Waiting Tone
- Call Holding Tone
- Call Disconnect Tone
- Call Conference Tone
- Busy Tone
- Reorder Tone (Network/Fast Busy)
- Off Hook Warning Tone (Howler Tone)
- SIT Tones 1 to 4
- Prompt Tone
- Confirm Tone
- Input Error Tone
- Number Error Tone
- Ringing Patterns
- Programmable Ring Patterns
- Four On/Off Time Pairs
- Default Ring
- Hold Rering
- Call Back Ring
- Call Back Ring Splash
- Call Forward Ring Splash
- Message Waiting Ring Splash
- 8 Distinctive Ring Patterns
- Distinctive Call Waiting
- Programmable Tone Generation
- Four Tones, Four On/Off Time Pairs
- 8 Distinctive Call Waiting Patterns
|
|
- LED Display Patterns
- Tri-Color LEDs (Red, Orange, Green)
- Programmable LED Patterns
- Four On/Off Time Pairs
- Configurable Display Priority
- Use and Waiting
- Ringing or Waiting
- PSTN in Use
- Use and Hold
- Line in Use
- Call Holding
- Do Not Disturb
- Call Forward
- Message Waiting
- Voice-over-IP (VoIP) Protocols
- Power-on Auto Registration
- Re-registration with SIP Proxy Server
- SIP over UDP
- SIP Authentication (HHP Digest with MD5)
- Quality of Service
- Port Priority for VoIP Packets from Application
- High and Low Priority Transmit Queues for Interface
- NAT/Firewall Support
- Built-in Router
- Automated NAT Traversal Without Manual Manipulation of Firewall/NAT
- NAT Traversal for Private Networks with STUN
- NAT Firewall
- Gateway and DMZ Port Forwarding
- LAN Pass Through
- Point-to-Point Protocol over Ethernet (PPPoE)
- Security
- Provisioning/Configuration/Authentications
- Password Protected Web based Administration
- RC4 Encryption for TFTP Configuration Profiles
- Authentication (DIGEST using MD5)
- Remote Configuration/Maintenance
- Web Configuration via Built-in Web Server
- Configuration Update via TFTP or HTTP
- Firmware Upgrade via TFTP or HTTP
- SYSLOG Update/Upgrade Processing Notifications
- Documentation
- Administration Guide
- Installation Guide
- Configuration Guide
|
Site Map
